Event based supervision (Sensor)
Event-based supervision with a sensor sends alerts to Tellucare through sensors installed at the service recipient. Event-based alerts can either be handled directly in Tellucare / Tellucare Go, or sent to a staffed response centre.
Preconditions
The Service recipient has a Neat Novo safety alarm
The sensor is connected to the Neat Novo safety alarm
The alarm routing is set up to the responce center (If alerts should be handled by the response center)
Options with sensor based supervision
In/out of room
The sensor used for this event is a PIR II (Passive InfraRed detector) device.This is a motion sensor that detects movements based on IR. The sensor has an associated door magnet and a control unit. The security alarm acts as a gateway for the transmission of alerts from the sensor.The sensor is battery powered so there will be no power cord connected to the sensor.
Required equipment: Neat Novo safety alarm and PIR II door sensor
In/out of bed/chair and sit in bed/chair
BED Bed sensor will be placed under the sheet (possibly waterproof sheet/protective sheet), or under the mattress if it is not too thick. The bed band is firmly attached to the mattress, but there may be a need to later move the band. The band should lie so that it covers the upper body. For some service recipients, it may be appropriate to use more than one bed band to get a more correct notification.The same sensor can also be used for a chair.
Required equipment: Neat Novo safety alarm and BED bed sensor
Fallsensor
Tellu supplies a fall sensor in the form of a Smile Fall which is worn by the service recipient either around the neck or on the arm. The fall sensor sends a notification when a fall is detected and alarms are forwarded to relevant recipients.
Required equipment: Neat Novo safety alarm and Smile fall
Epilepsisensor
The Emfit epilepsy alarm is a bedside alarm that registers and warns when a person has a tonic-clonic epileptic seizure with muscle spasms. The alarm registers both continuous movements and seizures that continue for a predefined period of time. It can also register and notify if the user leaves the bed.
Required equipment: Neat Novo safety alarm and Emfit epilepsy alarm package